Type: | Insulated |
---|---|
Conductor Type: | Stranded |
Application: | Underground |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Specifications for 4 Core Cable :
PVC XLPE insulated power cable
1 IEC, ASTM, DIN, BS standard
2 ISO,CE,CCC certification
3 Response within 12 hours
Conductor for 4 Core Cable :
Standard and Property for Using
The XLPE insulated power cable can be produced according to our factory specification with the standard IEC60502. The factory can also design and manufacture special XLPE cable according to the other standards required by the customers. They not only have excellent electric, mechanical properties, but also have powerful resistance against chemical corrosion, heataging and environmental stress. Their structures are simple. The permissible maximum operating temperature is 90C. It is convenient for using, and they can be laid with no restriction of different elevation.
Reference Standards: | IEC60502-1, IEC 60228, IEC60332 -1/2/3, BS6346, BS5467, BS6360, BS6724, VDE0276, AS/NZS 5000.1, etc. | ||
Rated Voltage: | 600/1000V (0.6/1kV) | ||
Core Number: | Single Core, Two Core, Three Core, Four Core, Five Core (1C, 2C, 3C, 4C, 5C) | ||
Available Dimensions: | 1.5mm2, 2.5mm2, 4mm2, 6mm2, 10mm2, 16mm2, 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2, 500mm2, 630mm2. | ||
Codes Available: | NYY, NAYY, N2XY, NA2XY, NYCY, NYCWY, NYBY, NAYBY, NYRY, NAYRY, N2XRY, N2XBY, NA2XBY, NA2XRY, N2XH, NA2XH,NHMH, NHXMH, | ||
VV, VLV,YJV, YJLV, VV22, VLV22, YJV22, YJLV22, VV32, VLV32, YJV32, YJLV32, VV72, VLV72, YJV72,YJLV72 | |||
Application: | To be laid indoors, in tunnel, cable furrow or pipe, underground. Steel tape armored cable could bear certain mechanical force, but it can't bear great pulling force. Steel wire armored cable is applicable to the well, water inside and fall in the bad soil, it can bear great pulling strength and mechanical forces. | ||
Construction: | It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed, so that the safeguarding of persons and the integrity of the product will not be affected during installation. | ||
Conductor: | Stranded round compacted copper or aluminum conductor (Cu / Al ), copper wire annealed. | ||
Insulation: | XLPE (Cross-Linked Polyethylene) or PVC (Polyvinyl Chloride) | ||
Core Identification: | 1 Core: Brown 2 Cores: Brown, Blue 3 Cores: Brown, Black, Grey; 4 Cores: Blue, Brown, Black, Grey 5 Cores: Green/Yellow, Blue, Brown, Black, Grey Alternative core identification: White Cores with Black numbers |
||
Filler: | Polypropylene filament with lapped binding tape | ||
Separator: | Binding tape | ||
Bedding: | PVC (Polyvinyl Chloride) or LSZH. | ||
Armouring: | Single Core: Aluminium Wire Armoured (AWA) Multi-core: Steel Wire Armoured (SWA) or Steel Tape Armoured (STA) |
||
Sheath: | PVC (Polyvinyl Chloride), flame retardant PVC, PE, LSOH, HFFR | ||
Colour: | Black | ||
Temperature Rating: | 0°C to 90°C (XLPE), 0°C to 70°C (PVC)During short circuit (lasting less than 5 seconds) the maximum temperature of the cable conductor shall not be above 250°C (160°C for PVC)Environment temperature should be no lower than 0°C for laying the cable. | ||
Minimum Bending Radius: | Single Core Cable: Non Armored Cable 20D, Armored Cable 15D | ||
Cores Cable: Non Armored Cable 15D, Armored Cable 12D. | |||
Remarks: D means practical external diameter of the cable | |||
Code | Construction 0.6/1kV (Single Core, 2C, 3C, 3C+1C, 3C+2C, 4C, 4C+1C, 5C) Low Voltage Power Cable Description |